Considered an icon of luxury a few decades back, Air Conditioners (abbreviated to AC) are now a basic necessity of almost every household. The growing use of ACs can be primarily attributed to the rise in global warming on earth. Technically put, air conditioner is an electronic appliance to control the temperature by dropping the humidity. The functioning of an AC is very similar to that of a refrigerator. It pulls out the heat from an area using a refrigeration cycle to keep the environment cool and fresh.
Most of the air conditioners work almost in the same way irrespective of their shape and size. The most popular among the air conditioners available in the market is referred to as a split system air conditioner. In this kind of air conditioners the compressor is installed inside the home where as the condenser remains outside and they are connected by means of refrigerant pipes. The noise produced in case of split air conditioners is very less as compared to its other competitor. The wall mounted split air conditioner has a rotary compressor, which forces cold air into the room.
Facts you should know about split ACs:
The tonnage of the air conditioner determines its cooling capacity. It depends on the size or area of the room you need to use it in. Split ACs are available in 0.50 ton, 0.75 ton, 1 ton, 1.5 ton and 2 tons. If you go for a lower tonnage AC to reduce its cost, then it troubles you with more power consumption that is not favorable in the long run.
BTU or British thermal unit per hour is the unit for standard measurement of the cooling capacity of an air conditioner. Hence, the strength of the AC largely depends on the cooling capacity. As a matter of fact, the cooling capacity of an AC of one ton can be 12000 BTU per hour.
There are some home truths about Split Air Conditioners that buyers must be aware of:
Size Does Matter – It is easy go get confused regarding the various sizes of split air conditioners that is dependent on the size of your room. For instance, a 35 sq. ft. area will need 0.75-ton air conditioner whereas a 2-ton AC will suit well for a room having an area of 250 sq. ft. if you want to cool a large hall, you can divide it into small rooms to calculate the accurate tonnage it will need.
Hole in The Wall – For installing a split AC in your room, like or not, you might need to make a hole on you wall. The depth of the hole depends on the unit you have decided to buy. Usually, it is 3 inches in diameter.
Tubing – A split AC requires an additional component such as Tubing to function properly. So you need to purchase it additionally from the market. lg 1 ton dual inverter ac It usually acts as a connecter between indoor and outdoor units. Generally, the size of the tubing depends on the distance between the indoor unit and the outdoor unit.